GA 500

Features

  • One drive to control any induction, permanent magnet or synchronous reluctance motor
  • Built in braking chopper on all ratings which reduces panel space.
  • Easy motor setup without the need for auto-tuning simplifies tuning with connected machinery in open loop for induction machines.
  • Effortless Network Integration which supports of all major networks with cost effective gateway feature
  • Powerful DriveWizard PC tool for drive management, start-up, programming and failure analysis
  • DriveWorksEZ for programming tool for extending functionality by logical programming
  • Convenient commissioning by programming without power supply using PC or an Android/iOS Smart Phone
  • Increased safety and reliability with built in STO SIL3 functional safety
  • Side-by-side mounting and heatsink out on the back for minimum panel size and optimized cooling
  • Ambient temperature of 50 °C without derating (IP20), max 60°C with derating
  • Maximum output frequency of 590Hz
  • Built in 24VDC source to power external sensors without the need of additional SMPS
  • Preditive maintenance monitors to monitor the service life of components like Capacitor, IGBT, softcharge bypass relay and Cooling fan .
  • Optional Din rail kit available for easy installation.

High Performance Vector Control Drive A1000

Available Ratings

  • 1 ph 200V class : 0.1 to 4kW
  • 3 ph 200V class : 0.1 to 18.5kW
  • 3 ph 400V class : 0.37 to 22kW

Application

Download

Download catalogue

Single Phase : 200V Class

Model/Ordering Code HD ND
Output kW Output A Output kW Output A
CIPR-GA50TB001 0.1 0.8 0.18 1.2
CIPR-GA50TB002 0.2 1.6 0.37 1.9
CIPR-GA50TB004 0.5 3 0.75 3
CIPR-GA50TB006 1.1 5 1.1 6
CIPR-GA50TB010 1.5 8 2.2 9.6
CIPR-GA50TB012 2.2 11 3 12.2
CIPR-GA50TB018 4.0 17.6 – –

Three Phase : 200V Class

Model/Ordering Code HD ND
Output kW Output A Output kW Output A
CIPR-GA50T2001 0.1 0.8 0.18 1.2
CIPR-GA50T2002 0.2 1.6 0.37 1.9
CIPR-GA50T2004 0.5 3 0.75 3.5
CIPR-GA50T2006 1.1 5 1.1 5
CIPR-GA50T2008 1.1 6.9 1.5 8
CIPR-GA50T2010 1.5 8 2.2 9.6
CIPR-GA50T2012 2.2 11 3.0 2.2
CIPR-GA50T2018 3.0 14 3.7 7.5
CIPR-GA50T2021 4.0 17.6 5.5 21
CIPR-GA50T2030 5.5 25 7.5 30
CIPR-GA50T2042 7.5 33 11 42
CIPR-GA50T2056 11 47 15 56
CIPR-GA50T2070 15 60 18.5 70
CIPR-GA50T2082 18.5 75 22 82

Three Phase : 400V Class

Model/Ordering Code HD ND
Output kW Output A Output kW Output A
CIPR-GA50T4001 0.37 1.2 0.37 1.2
CIPR-GA50T4002 0.55 1.8 0.75 2.1
CIPR-GA50T4004 0.7 3.4 1.5 4.1
CIPR-GA50T4005 1.5 4.8 2.2 5.4
CIPR-GA50T4007 2.2 5.6 3.0 7.1
CIPR-GA50T4009 3.0 7.3 4.0 8.9
CIPR-GA50T4012 4.0 9.2 5.5 11.9
CIPR-GA50T4018 5.5 14.8 7.5 17.5
CIPR-GA50T4023 7.5 18 11 23.4
CIPR-GA50T4031 11 24 15 31
CIPR-GA50T4038 15 31 8.5 38
CIPR-GA50T4044 18 39 22 44
CIPR-GA50T4060 22 45 30 60
Control Characteristics
Product GA500
Type Versatile Compact Drive
Rated Output Voltage (dependent on input) Single Ph 200V Class : 200 to 240VAC
Three Ph 200V Class : 200 to 240VAC
Three Ph 400V Class : 380 to 480VAC
Motor Types Induction Motor
Permanent Magnet Motor (IPM/SPM)
Synchronous Reluctancec Motor (SynRM)
Control Methods V/f Control (V/f)
Open Loop Vector Control (OLV)
OLV for PM (OLV/PM)
Advanced open loop vector control for PM (AOLV/PM)
EZ Open Loop Vector Control (EZOLV)
Speed Control Range 1:40 for V/f
1:100 for OLV
1:10 for OLV/PM
1:100 for AOLV/PM
1:10 for EZOLV
Starting Torque 150% @3Hz for V/f
150% @0.6Hz for OLV
100% @10% speed for OLV/PM
100% @0rpm for AOLV/PM
100% @10% speed for EZOLV
Frequency Range 0 to 590Hz
Braking Transistor Built-in for all ratings (20% braking torque)
Frequency Accuracy Digital reference: within ±0.01% of the max. output frequency (-10°C to +40°C)
Analog reference: within ±0.1% of the max. output frequency (25°C±10°C)
Frequency Setting Resolution Digital reference: 0.01 Hz
Analog reference: 1/2048 of the maximum output frequency setting (11 bit)
Output Frequency Resolution 0.001 Hz
Torque Limit Parameter settings allow separate limits in four quadrants in Open Loop Vector Control, Advanced Open Loop Vector Control for PM, and EZ Open Loop Vector Control.
Accel/Decel time 0.0 to 6000.0 seconds
Environmental Factors
Ambient Temperature -10˚C to +50˚C ( No Deration required), Upto 60˚C with deration factor
Altitude 1000 m or less with no deration . Altitudes over 1000 m and up to 4000 m are possible by derating the output current by 1% for every 100 m.
Humidity 95% RH or less (no condensation)
Surrounding Area Pollution degree 2 or less
Shock 10 Hz to 20 Hz, 1 G (9.8 m/s2)
20 Hz to 55 Hz, 0.6 G (5.9 m/s2)
Area of Use Indoors
Protection Features
Motor Protection Motor overheat protection based on output current
Momentary Overcurrent Protection Drive stops when output current exceeds 200% of the HD output current.
Note: 200% is the target value. The value varies depending on the capacity.
Overload Protection Drive stops when the output current exceeds these overload tolerances.
・ HD Rating: 150% of the drive rated output current for 60 s.
・ ND Rating: 110% of the drive rated output current for 60 s.
Overvoltage Protection 200 V class: Stops when the DC bus voltage is more than approximately 410 V
400 V class: Stops when the DC bus voltage is more than approximately 820 V
Undervoltage Protection 200 V class: Stops when the DC bus voltage decreases to less than approximately 190 V
400 V class: Stops when the DC bus voltage decreases to less than approximately 380 V
Momentary Power Loss Ride-Thru Stops when power loss is longer than 15 ms.
Continues operation if power loss is shorter than 2 s (depending on parameter settings).
Heatsink Overheat Protection Thermistor
Stall Prevention Stall prevention during acceleration/deceleration and constant speed operation
Ground Fault Protection Protection by electronic circuit
Charge LED Charge LED illuminates when DC bus voltage is more than 50 V.
Standards Compliance UL61800-5-1
EN61800-3
IEC/EN61800-5-1
Two Safe Disable inputs and 1EDM output according to ISO/EN13849-1 Cat.3 Ple,IEC/EN61508 SIL3
Power Specifications
Rated input Voltage/Frequency 400V Class:
・Three-phase AC power supply 380 V to 480 V 50/60 Hz
・DC power supply 513 V to 679 V
200V Class :
・Single-phase or Three-phase AC power supply 200 V to 240 V 50/60 Hz
・DC power supply 270 V to 340 V
Allowable Voltage Fluctuation −15% to 10%
Allowable Frequency Fluctuation ±5%
Common Specifications
Carrier Frequency Derating the output current enables a maximum of 15 kHz to be set.
Multi Function Digital Inputs 7 Digital Inputs ( NPN or PNP ) , 24VDC. External and internal power source possible
Multi Function Digital Outputs 1 Programmable Relay with MA-MB-MC (AC 250 V, max. 1 A DC 30 V, max. 1 A min. load DC 5 V, 10 mA) , 2 programmable Photocouplers P1-C1 and P2-C2 (DC 48 V, max. 50 mA)
Multi Function Analog Inputs 1 Multi function Analog input A1 (-10 – +10 V (20 kΩ))
1 Multi Function Analog input A2 (0 – 10 V (20 kΩ), 4 – 20 mA (250 Ω)/0 – 20 mA (250 Ω))
Multi Function Analog Output 1 Multi function Analog output AM-AC (0 – 10 V/4 – 20 mA (250 Ω))
Pulse Train 1 Pusle Train output (0 – 32 kHz (2 kΩ))
1 Pulse Train input (max 32mA)
Serial communication MEMOBUS/Modbus (RTU mode) comm. RS-485, Max. 115.2 kbps
DC Supply DC 24 V Power supply, Output 24 V, max. 150 mA
Optional communication Protocols Mechatrolink, Profibus, Profinet, Ethernet TCP/IP, Modbus TCP/IP, CC-Link, Canopen, Bacnet, Devicenet, EtherCAT
Programming Interface Serial port or Mini-USB in front of VFD
Additional Functions Feed Forward Control, Momentary Power Loss Ride-Thru, Speed Search, Overtorque detection, torque limit, 17 Step Speed (max.), accel/decel switch, S-curve accel/decel, 3-wire sequence, Auto-Tuning (rotational, stationary), Dwell, cooling fan on/off switch, slip compensation, torque compensation, Frequency Jump, Upper/lower limits for frequency reference, DC Injection Braking at start and stop, Overexcitation Deceleration, High Slip Braking, PID control (with Sleep function), Energy Saving Control, MEMOBUS/Modbus (RTU mode) Communications (RS-485, max. 115.2 kbps), Fault Restart, Application Presets, DriveWorksEZ (customized functions), Parameter Backup Function, Online Tuning, KEB, Overexcitation Deceleration, Overvoltage Suppression, High Frequency Injection, Zero Speed Control, etc.

GA500 solar drive is used for solar pump applications

  • Suitable for BLDC and PM motor
  • Suitable for surface mount and submersible pump for 3 Phase 200Volts/400volts induction motor
  • Wide range capacity from 0.37 kW to 30 kW
  • All day run stop restart mode management
  • Diagnostics and self protection features.
  • Protection against dry run of pump
  • Simple and faster installation and commissioning.
  • Remote Monitoring of Drive
GA500 Solar Technical Electrical specification
Pump inverter type V/F control with derived MPPT Technology
Dual supply ( Grid/ Solar) Change over Available
Input DC voltage ( VOC) 400volts DC for 200volts Class and 800volts class for 400 volts drive
Input DC voltage ( Vmp) 280 VDC tp 310 V Dc /510 V dc to 620 V DC
Input DC cuttent and power As per motor capacity
Min frequency 0hz selectable setting range
Max frequency 120Hz
Shock 10 to less than 20 Hz (9.8m/s2) max
output Ac voltage 3 phase 190-240v (-15%.+10%)/380-480V/(-15%,+10%)
Output Ac voltage As per chart above
Motor frequency 0-60Hz
Motor control technology V/f Control
MPPT voltage 230V to 360 V for 200 volts
460V to 620 V for 400 volts
Over load capacity 120% for ND
Under voltage 125V DC for 200 volts Class/ 250 for 400 volts Class
Protection Dry run , short circuit, Open Phase in input & output side, High Voltage, Low voltage and over load , earthing, recerse polarity.
Ambient temp -10deg to 50 deg
Relative humidity Max 95% relative humanity

Versatile Compact Drive

  • Available Ratings:

     

  • 1 ph 200V class : 0.1 to 3.7kW
  • 3 ph 200V class : 0.1 to 22kW
  • 3 ph 400V class : 0.2 to 30kW

Product List

GA 700 GA 500 A1000 V1000 J1000 U1000 Varispeed G7 A1000 HHP L1000A R1000 D1000 FAQ